20th Feb 2013, 06:38
...after reading your problem, I immediately assume it is your starter motor's ribbed belt. They are only tiny, and their tension should be set on the loose side of tensioning a belt. Yours needs tensioning ever so slightly to stop the slippage on the initial acceleration. Good luck!
30th Dec 2013, 01:54
Hi... yup, the squealing sound maybe came from the alternator belt. Try to tighten the belt a bit. Loosen 2 allen bolts on both sides, then tighten the belt by pulling the alternator up, then lock the allen bolts again.
2nd Apr 2011, 11:29
Try getting alternator checked, as your belt might be on its way out. It cost me 80 pounds in the U.K. for the job to be done, including belt, as you need a special tool to tighten the adjuster nut.